cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
52969
Views
10
Helpful
7
Replies

[Windows 11] Cisco anyconnect windows 11 compatibility

support75
Level 1
Level 1

Hello everyone,

 

I can't find  anyconnect client compatibility information for Windows 11.

Is v4.3.01095 compatible?

 

Thank you.

1 Accepted Solution

Accepted Solutions

 

 - No you can't if you effectively want to use Anyconnect as I explained before : -> You need to upgrade.

 

                      - Not mentioned in : https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect43/release/notes/b_Release_Notes_AnyConnect_4_3.html  you will need v4.10(.x) -> https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#reference_DABA1C4FF5CB45F4904B538BAB32749E

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

View solution in original post

7 Replies 7

balaji.bandi
Hall of Fame
Hall of Fame

as per i know 4.3 is too old, may be you need to look latest version of cisco any connect 4.9 or 4.10

 

 

BB

=====Preenayamo Vasudevam=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello,

 

what error are you getting ? I remember somebody else having this issue a few months ago, check the thread below.

 

https://community.cisco.com/t5/network-management/cisco-anyconnect-client-amp-w11-client-error-connecting-vpn/td-p/4512836

Jitendra Kumar
Spotlight
Spotlight

Hello Dear,

if i can suggest then please go through the below YouTube link hope this will helpfull for you.

 

https://youtu.be/RJOtdh5I3X8

 

Thanks,

Jitendra

Thanks,
Jitendra

Mark Elsen
Hall of Fame
Hall of Fame

 

                     - Not mentioned in : https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect43/release/notes/b_Release_Notes_AnyConnect_4_3.html  you will need v4.10(.x) -> https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#reference_DABA1C4FF5CB45F4904B538BAB32749E

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

support75
Level 1
Level 1

Thank you all for your feedback.

For information, my question doesn't follow an incident. We want to migrate workstations to Windows 11 and the current VPN client version is 4.3.01095.
We want to know if we can keep this version.

 

 - No you can't if you effectively want to use Anyconnect as I explained before : -> You need to upgrade.

 

                      - Not mentioned in : https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect43/release/notes/b_Release_Notes_AnyConnect_4_3.html  you will need v4.10(.x) -> https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#reference_DABA1C4FF5CB45F4904B538BAB32749E

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

may be you need to look latest version of cisco any connect 4.9 or 4.10

Hope i have given suggestion here..

BB

=====Preenayamo Vasudevam=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help