[Windows 11] Cisco anyconnect windows 11 compatibility

[support75]

Hello everyone,

I can't find  anyconnect client compatibility information for Windows 11.

Is v4.3.01095 compatible?

Thank you.

[balaji.bandi]

as per i know 4.3 is too old, may be you need to look latest version of cisco any connect 4.9 or 4.10

[Georg Pauwen]

Hello,

what error are you getting ? I remember somebody else having this issue a few months ago, check the thread below.

https://community.cisco.com/t5/network-management/cisco-anyconnect-client-amp-w11-client-error-connecting-vpn/td-p/4512836

[Jitendra Kumar]

Hello Dear,

if i can suggest then please go through the below YouTube link hope this will helpfull for you.

https://youtu.be/RJOtdh5I3X8

Thanks,

Jitendra

[marce1000]

                     - Not mentioned in : https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect43/release/notes/b_Release_Notes_AnyConnect_4_3.html  you will need v4.10(.x) -> https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#reference_DABA1C4FF5CB45F4904B538BAB32749E

 M.

[support75]

Thank you all for your feedback.

For information, my question doesn't follow an incident. We want to migrate workstations to Windows 11 and the current VPN client version is 4.3.01095.
We want to know if we can keep this version.

[marce1000 · Accepted solution]

 - No you can't if you effectively want to use Anyconnect as I explained before : -> You need to upgrade.

                      - Not mentioned in : https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect43/release/notes/b_Release_Notes_AnyConnect_4_3.html  you will need v4.10(.x) -> https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect410/release/notes/release-notes-anyconnect-4-10.html#reference_DABA1C4FF5CB45F4904B538BAB32749E

 M.

[balaji.bandi]

may be you need to look latest version of cisco any connect 4.9 or 4.10

Hope i have given suggestion here..