10-19-2009 03:00 PM
Hi,
I have WLC and it is not coming green on the topology service when the
SNMP v2 or v3 is enabled. But it shows green when I enable SNMP v1 on it.
How can we set SNMP v2 or v3 on WLC to have the device come green in Topology as well?
-Thanks
Solved! Go to Solution.
10-20-2009 08:48 AM
10-19-2009 03:20 PM
You must enable SNMPv1 on the WLC. That is required to manage it if you are using community string-based SNMP. LMS 3.2 has converted to mostly using SNMPv2c, and only falling back to v1 if absolutely necessary.
10-20-2009 07:33 AM
Thanks Jclarke,
One last question, if I upgrade to LMS 3.2 can I use the SNMP v2 option on my WLC?
-Thanks
10-20-2009 08:48 AM
Yes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide