cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
723
Views
5
Helpful
3
Replies

WLC

georgeef1
Level 1
Level 1

Hi,

I have WLC and it is not coming green on the topology service when the

SNMP v2 or v3 is enabled. But it shows green when I enable SNMP v1 on it.

How can we set SNMP v2 or v3 on WLC to have the device come green in Topology as well?

-Thanks

1 Accepted Solution

Accepted Solutions
3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

You must enable SNMPv1 on the WLC. That is required to manage it if you are using community string-based SNMP. LMS 3.2 has converted to mostly using SNMPv2c, and only falling back to v1 if absolutely necessary.

Thanks Jclarke,

One last question, if I upgrade to LMS 3.2 can I use the SNMP v2 option on my WLC?

-Thanks

Yes.