07-03-2003 03:12 AM - edited 02-20-2020 10:50 PM
Need to verfiy how to correctly permit access via port 100003 ( Sun's Network File System) through PIX, as fixup protocol will not support this port (100003). Another way is by using "established" command - still trying.
PIX ver - 6.x
Thanks.
07-08-2003 06:02 AM
The number for Sun's NFS 100003 is actually the program number and not the port number. Here is a list of the program numbers and the corresponding port numbers:
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 946 status
100024 1 tcp 946 status
100003 2 udp 2049 nfs
100003 2 tcp 2049 nfs
100005 1 udp 945 mountd
100005 2 udp 945 mountd
100005 1 tcp 945 mountd
100005 2 tcp 945 mountd
07-13-2003 08:25 PM
Hi Raymond,
Thanks for the feedback. It means that I need to use "established" command to tie/map these ports together? Do you have any successful attempt before?
Thanks.
AK
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide