12-22-2014 06:54 AM - edited 03-11-2019 10:15 PM
Hi everyone,
The Cisco ASA 5505 doesn't seem to allow the TFTP connection from 192.168.5.103/24 to 192.168.10.202/24. Normally TFTP is being used in the same subnet, but not in my case. I have a DHCP Relay which is working, but when I use the free TFTPD tool from one side to the other TFTPD tool, it only creates an empty file. Does someone know which config I might be missing in my Cisco ASA?
Thank you in advance.
---
Nathan
Solved! Go to Solution.
12-22-2014 08:52 AM
Hi Jonathan,
1. Please make sure tftp server is using the correct interface from the given subnet. (under Server Interfaces on tftpd32)
2. Check if the default gateway have a correct route towards TFTP Server.
3. Make sure TFTP server can reach the client subnet.
HTH
12-22-2014 08:52 AM
Hi Jonathan,
1. Please make sure tftp server is using the correct interface from the given subnet. (under Server Interfaces on tftpd32)
2. Check if the default gateway have a correct route towards TFTP Server.
3. Make sure TFTP server can reach the client subnet.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide