04-30-2019 07:25 AM - edited 02-21-2020 09:05 AM
Hi All
I have three ASA firewalls and I need know the firepower module are supported.
The models are:
ASA 5525 version 9.2(2)4
ASA 5525 version 9.6(4)3
ASA 5510 version 9.1(7)23
TIA
Cristian
04-30-2019 07:44 AM
Hi,
ASA 5525 version 9.2(2)4 - The highest Firepower Version you can support on this is 5.4.0 This is EOS on 30/11/2020. You would want to upgrade the ASA Software on this to support a newer version of FP.
ASA 5525 version 9.6(4)3 - 6.4 is supported
ASA 5510 version 9.1(7)23 - Firepower unsupported on this device in general.
05-02-2019 01:04 PM
Hi
For the ASA 5525 version 9.6(4)3 , what I need for install the FP service module? It requires an additional hardware?
TIA
Cristian
05-02-2019 02:07 PM
You will need an ssd if you haven't installed one already.
You can check by running
Show inventory
Also run show module to see if there is any installation of an SFR.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide