04-01-2023 01:02 AM
My ASA 5512-x firewall got burnt by a power surge. I got a replacement of the same device. I swapped the HDD but it seems the new device didn't read the configuration on the HDD. My internet configurations are done on the firewall and I don't have internet.
Please what can I do?
I need help
Solved! Go to Solution.
04-01-2023 05:50 AM
The internet is coming up now but it will just come and go back with a time frame of 3mins.
you mean on and off internet for the LAN side devices ? then you need post here show run (from ASA)
I think the device is now seeing the configuration but what may still be the issue?
what config you see OLD one or new ONE either can post show run here
04-01-2023 02:23 AM
If the ASA burnt, maybe HDD might have gone bad too, you need to start from a fresh ASA configuration (if you do not have backup out of the box )
start from here :
04-01-2023 03:15 AM
Thank you Balaji for your swift response.
However the situation has changed. The internet is coming up now but it will just come and go back with a time frame of 3mins.
I think the device is now seeing the configuration but what may still be the issue?
04-01-2023 04:44 AM - edited 04-01-2023 04:44 AM
if you have new one it UP, disconnect any link to ASA
use old HDD and copy config as @balaji.bandi suggest
then add new HDD and enter config again.
it may that some part of HDD is also defect, do you want to loss second FW.
04-01-2023 05:50 AM
The internet is coming up now but it will just come and go back with a time frame of 3mins.
you mean on and off internet for the LAN side devices ? then you need post here show run (from ASA)
I think the device is now seeing the configuration but what may still be the issue?
what config you see OLD one or new ONE either can post show run here
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide