04-19-2016 07:28 PM - edited 03-12-2019 12:38 AM
Hi,
Is DCD supported on an ASA firewall cluster. I have a ASA 5585 firewall cluster running 9.3.3. DCD is configured for a certain class of traffic. It doesn't seem to prevent the connection from dying after idle timeout.
"show service-policy" is showing DCD is enabled for this class with default values (retry interval, max retries). However, the DCD counters are not increasing.
Regards,
Rick.
Solved! Go to Solution.
04-19-2016 07:36 PM
Hi Rick,
DCD is not supported on ASA cluster.
There is an enhancement request opened for the same:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuw28143/?reffering_site=dumpcr
Regards,
Aditya
Please rate helpful posts and mark correct answers.
04-19-2016 07:36 PM
Hi Rick,
DCD is not supported on ASA cluster.
There is an enhancement request opened for the same:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuw28143/?reffering_site=dumpcr
Regards,
Aditya
Please rate helpful posts and mark correct answers.
04-19-2016 07:37 PM
Thanks Aditya.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide