02-26-2019 06:42 AM - edited 02-21-2020 08:52 AM
Hi
I am trying to configure transparent firewall see below diagram, simple setup 3 vlans and the svi is on the router, but when I trying to ping from the vpc1 to it's default gateway 192.168.1.1 and it just doesn't work, I can see the arp on the router for vpc1 and I have already done the access list for icmp and also put inspect icmp into the policy map. vpc1 can ping interface bvi1 (192.168.1.50) e0/0 interface on the switch and router are just trunk and allow all the vlans, thanks
02-26-2019 07:07 AM
if this eve-ng what is IOL version of the switch, try no ip cef and let me know if that works ?
02-26-2019 07:36 AM
02-26-2019 08:16 AM
Ok good clarified it IOL and you tried, Do you have ACL rules ? If you have ASDM Access Launch the monitor and ping from vpc and see what error you getting ?
icmp permit any inside
02-26-2019 08:38 AM
02-26-2019 09:20 AM
Let me check the Lab and get back to you, if i closely look your config confusing me here. (but weill clarify after testing).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide