11-16-2012 01:59 AM - edited 03-11-2019 05:24 PM
hi,
I am trying to access my firewall using ASDM but it is giving me an error 'Certificate Validation Failure'
I have manually set a clock on the firewall to match with the machine from where I am trying to access FW using ASDM
ASA version is 8.2 (2) & ASDM version is 7.0
I get same error message with ASDM 6.4
11-16-2012 02:06 AM
It's not only the clock that has to be in sync. To connect to the ASDM without a certificate-warning you also have to:
- Use the FQDN or IP that is in the certificate
- Trust that certificate. If it is self-signed then import it into the trusted root store, If it is from your CA, then import the root-cert into your trusted root-store.
To investigate that further, please show the output of "show crypto ca certificate".
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
11-16-2012 02:41 AM
The output of sh crypto ca certificate is blank.
11-16-2012 02:51 AM
The easiest way to get ASDM-Access should be with the setup-command. Accept everything that is preconfigured correctly and add all that is missing (i.g. the host that runs the ASDM).
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide