Can someone help if it possible to delete custom signature directly to sensor.
Forum Posts
Resolved! asa with firepower vs twice nat
i neet to replace my asa 5515 with asa5516x with firepower. i'm using nat on asa connected outside to peplink and a have other nat configured on ISP router so i need to know if the twice nat (1st asa and 2nd on ISP router) can creat any trouble for...
Hello, I have been trying to figure out how to block port 80 from outside my network to a specific server. I want to allow only port 8081 to be accessed. Currently when I setup an access rule to block http it blocks all access to the server from outs...
This is NOT a java issue. I repeat this is NOT a java issue. After I reload the firewall, everything works as expected. 3-4 days later ASDM and Anyconnect stop working. Error: "could not load file/URL asdm.jnlp". I am able to ping and ssh into t...
This session will provide an opportunity to learn and ask questions about how to troubleshoot issues with the Cisco Adaptive Security Appliance (ASAs), such as crashes, high CPUs, and other common issues. To participate in this event, ask your ques...
Having now been able to use VTI on recent ASA code, is there similar config / setup available for FTD appliances running FTD image?
Hi allOur Cisco 5550 rebooted today and we can see there is some crashinfo with the command:show crashinfoHowever, the text output is very long and I'd like to copy this file onto my PC rather than looking through the serial port session. I can't see...
I've got a Cisco 5515-X running the latest 6.2.3.2 FTD code. I'd like to use 4 interfaces for Routed mode traffic to replace an aging ASA 5510 with the old code (DMZ, Inside, Outside, and Failover Interfaces). I'd like to use the other remaining i...
I was troubleshooting an issue for someone here... Ultimately, I did find the problem, but in the process I uncovered something strange. Can anyone explain to me why the syslog says "Reset-I" but the RST is coming from the outside (as evidence by the...
The goal: Allow RDP sessions from the "outside" represented here by the "Internet_PC" VM with the ip of 192.168.50.100. This PC has to be able to follow the path highlighted in red, using RDP over port 80. There will actually be 5 users coming ...
Hi All, who can help to fix this problem? i can telnet access the support.sourcefire.com, all evaluation licenses are good but have a problem to download the URLDB, thank you. Regards, Ray
I am having issues with a port forward for an ASA 5506-x. All of the packet traces run fine, but with I attempt a connection the firewall logs show the following error. 3 Sep 03 2018 00:59:12 174.230.134.101 9631 <<outside IP>> ...
Hi : I have two FPR4110 and a vFMC, but I found that the dashboard widget can only show the interface status and traffic of the FMC itself not the FTD appliance, the same as the CPU status! that's so weird! It's that anyway to add a widget on the F...
Hello Team, I have a NSS322 and recently ransomware attacked in my network so i just reset my NSS322 and try to configure again but unfortunately i am not able to configure my NSS322 like previous setting. Now my previous setting is my NSS IP is ...
some extract from cisco guide:"Verifying Pre-Fragmentation For IPSec VPNsTo verify that this feature is enabled, consult the interface statistics on the encrypting router and the decrypting router. If fragmentation occurs on the encrypting router, an...
