Hello: I already have an Asus wireless router and an unmanged switch setup at home.Can I purchase a Cisco Rv110w and use it as a Firewall?How should I install it within my network? Thank you.
Hello: I already have an Asus wireless router and an unmanged switch setup at home.Can I purchase a Cisco Rv110w and use it as a Firewall?How should I install it within my network? Thank you.
Hi, i'm newbie to cisco asa, but i have an experience in administering different firewall before (freebsd, watchguard)..I thought this setup would be a piece of cake in ASA but im stuck on this one for 2 days already so here is my topology, Internal...
Hello,I'm not sure how the following is working. asa5525anyconnect version 3.1windows server 2008R2When you come in via VPN I send clients to the windows server for DHCP/DNS info and records get created in the FLZ and RLZ. When folks disconnect from ...
Hi, I'm currently trying to setup a VPN IPSec tunnel with an ASA (9.3.1 version) with a SaaS proxy provider. In order to only redirect web traffic I've been using extended acl matching services http and https for redirection in the tunnel. Howeve...
Hello Guys,I would like to know major difference Between Router vs Firewall, why we use firewall even Router has capability to do that now a days,why someone will deploy firewall in the Network?what are the Key features in Firewall that are not avail...
Hi,I have several SSM-10 IPS sensors (inside ASA5510 firewalls) and I'm trying to get it to send status changes & notifications via SNMP to our Syslog server (Solarwinds). I have enabled SNMP Traps under "Config>>Sensor Mgmt>>SNMP>>Traps Config" I h...
Hi Guys, I have a static nat for public-to-private as shown below on ASA 8.2 however I have users accessing this private-ip (10.0.10.245) via MPLS link.Users have a complianing there is a traffic loss. static (inside-10,outside-48) 116.19.49.52 10.0....
I am trying to configure sub interfaces on a Cisco ASA running v7.2 but it will not let me use the sub interface command?
Hi Experts, Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port. Pls explain briefly. Thanks
Hi all, I'm trying to configure IPv6 policy map in my Cisco PIX 515e 8.0(4). The guide says:policy-map type inspect ipv6 nameciscoasa(config)# policy-map type inspect ipv6 ipv6-map But I don't have that option in my CLI PIX5151e(config)# policy-map ...
Can anyone suggest on the below.I've a special requirement of implementing a separate physical interface for management on the newly added contexts. I understand we can allocate the same physical interface(which is connected to an access port) to mul...
We're having an issue with a server behind an ASA 5505 not being able to access SOME https websites, for example, https://cloudcare.avg.com.We have moved the server directly to the WAN and can access the website there so we believe this to be an ASA ...
Hello Folks, Anyone know if memory of a flash on ASA 5520 completely dead should I see anything when I'm connecting to console port ? (at least initial boot message?). I have a unit it looks ok but zero output via console. Tried all speed setting sa...
Hi, My GNS3 ASAv with VMware not pinging to router why?
Can ASA with FirePower services inspect SSL traffic or we need SSL inspection appliance.How can ASA force Application Control for SSL. Let say, allow only reading of Social Networking while bloking upload/post if not be able to see inside SSL?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-16-2025 04:21 AM | ||
07-06-2025 01:40 PM | ||
07-04-2025 01:59 AM | ||
06-19-2025 07:32 AM | ||
06-17-2025 01:07 PM |
User | Count |
---|---|
10 | |
7 | |
5 | |
2 | |
1 |