Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I am trying ti simply configure Dynamic pat but getting the  (nat-xlate-failed) NAT failed. Tried all possible permutations and combinations but does not seem to be working. Phase: 1Type: ROUTE-LOOKUPSubtype: inputResult: ALLOWConfig:Additional Infor...

suprisha by Community Member
  • 766 Views
  • 1 replies
  • 0 Helpful votes

Hello.Could anybody explain what's wrong with my configuration?I have ASA ASA-5525-X with 9.12 software. Outside interface has 3 real address ranges from ISP. Inside network's (9 distinct LANs) users access the Internet through one ip address. It's o...

I'm new to CISCO and ACLs and NATs but I'm willing to learn.I am having problems allowing FTP access through my ASA5505 ASA 9.2 (2) ASDM 7.3(3)I started pulling configs OFF google and I see stuff I don't understand plus stuff about having to allow ot...

marksoft1 by Community Member
  • 3930 Views
  • 8 replies
  • 0 Helpful votes

I am trying to get outgoing NAT working on an ASA 5520 with little successTest Host address: 10.200.100.36Destniation IP: 216.34.181.96NAT rules:# show running-config global                         global (outside) 101 interface# show running-config ...

FWSM migration to ASA 5585-S10X-K9; ASA's, I understand, do NOT support the use of VLANs (we have 4 on FWSM)--basic question is, will each of the previous VLANS on FWSM now be connected to a separate NIC on the ASA, or can one NIC on the  ASA host th...

tboneshep by Community Member
  • 1170 Views
  • 1 replies
  • 0 Helpful votes

I'm hoping someone can help. On two 5525X ASA's one is running 9.1(1) and the other 9.1(4). I'm a read only user with privilege level set to 5.What I notice is the following when I SSH to ASA's via management interface:asa1 runs 9.1(4) and when I typ...

John.Syd.Aus by Community Member
  • 1441 Views
  • 3 replies
  • 0 Helpful votes

Video conferencing worked when running through an ASA5520 running 8.3(1).  Remote end can hear audio but not see video during video conference now that we have upgraded from the ASA5520 to ASA5545 running 9.2(2)4. Old and new configs match for inspec...

Hello, as the title states, I have an ASA 5505 at one facility that is only getting around 16mb down on a 100mb circuit. No errors on either interface, and we've tried manually setting port speed and duplex, and auto, (both sides show it negotiating ...

georgeeye by Community Member
  • 1178 Views
  • 4 replies
  • 0 Helpful votes