I ran the following asp-drop packet capture on my ASA 5520 Firewall:capture asp type asp-drop acl-drop headers-only circular-bufferI then performed the following show command. I replaced the real IP addresses with different ones so as not to reveal m...
Hi all, I have a asa 5505 and im having the following error. nat (inside) 0 access-list inside_nat0_outbound ERROR: access-list has protocol or port Any ideas?
I suspect this is relatively simple, but I'm brand new to the Cisco line (and to the forums), so my apologies if I'm unclear or in violation of forum etiquette. I have an ASA5515 which will be using 2 external interfaces, and I need to make a single ...
Dear All, Which is the most stable version of operating system for Cisco ASA 5510. Let me know operating system version and asdm version. Thank you.
Hi, I installed ASA 5525 with CDA and I tried to configure user based ACL without success. When I tried I received the following error message:"Failed to retrieve users from the active directory server. Try checking the server configuration , network...
Hi, although I see that the ASA5510 is no longer being sold, it is not clear to me when the last date for software patching/maintenance is set for?Most Cisco products that go EoL have a "End of Software Support" date. All I can find for the ASA5510 i...
HI, If my Customer buy an ASA5512-K9 and he want to add IPS module into the ASA, is it possible or do he need to replace all of the security Appliance. Also what are the alternative to provide IPS tp an ASA5512-K9 via the web with firepower Thanks
Hi,We have a webserver behind an ASA 5520 which has a static NAT setup to forward TCP port 80 traffic through to the private address of the server on port 80 which is working fine.We are having an issue with one site on the internet being unable to a...
I have been presented with a NAT scenario that I'm trying to work though, basically it is a src and dst nat like so:nat (inside,outside) source static src1-original src1-translated destination static dst1-original dst1-translated The twist is there a...
I know this is a little out of scope, but was hoping someone would have some insight.I have two Checkpoint firewalls connected to Cisco Nexus 5548UPs 10G. I am noticing a lot of dropped RC on the Checkpoint interfaces. I'm wondering if the firewalls ...
Hello ForumI am with a Customer today whom has purchased 2 ASA 5515-x next gen's.They are desiring to have an Active /Standy Failover Pair.When I perform a sho ver on both of the appliances, I can see that they are both licensed for Active/Active. Si...
Hi My 1801 router (IOS 15x) is using the original self signed certificate (1024) with an signature algorithm MD5. I would like to change the cert to a 2048 key length , with a hash of SHA1 or better but I'm unsure how to do this.Should I just generat...
Hi, Our problem is that we need to test macsec-trustsec for show one of our customer the functionality. Cisco sent us several 3750 and 3560 to try. with C3KX-SM-10GT: moduleWe don´t understand that 3750 have the ios right and some command we can´t t...
i have asa 5510 and i need IPS on it so i need to know if it software or Module and if it Module which one works with it thanks
I have reviewed numerous support discussions on this particular issue, but I am still unable to properly configure my ASA 5512-X to receive SMTP email. I can send email, and have access to all other services that I setup. I did create a network obje...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-22-2025 05:45 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM | ||
| 06-19-2025 07:32 AM |
| User | Count |
|---|---|
| 8 | |
| 6 | |
| 6 | |
| 1 | |
| 1 |
