i can't do it with ASDM and try to use command but still failnat (inside,outside) source static inside-10.18.20.162 4F-1.1.1.2it is working fine for the above command if there is more than one public ip, in case 1.1.1.1 is for firewall interface publ...
Hi,I am trying to upgrade a sensor on IPS-SSM-20 and have "errInUse-An Upgrade is already in progroess" error.Can I do anything to fix that or my only way out is to reboot a module ?P.S. Two modules are instaled on ASA-5520 - HA pair with multiple c...
Hi everyone,when we need to configure DHCP pool on ASA we use commanddhcpd address 192.168.50.3-192.168.50.192 interface xBut why we will use this option belowdhcpd address 192.168.150.120-192.168.150.120 int yNeed to know why we make a dhcpd pool...
I am new to ASA's and have just configured my 5505 out the box with an outside (10.10.1.7) + inside (192.168.1.1) IP & NAT. The ASA has got a default route to another router (default geteway) thats connected to the internet. I have it connected this ...
I'm trying to configure a transparent firewall. I have been loosely following: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008089f467.shtml my management network is 10.10.0.0 while the connection I wan...
If I wanted to disable websense filtering, but not completely remove my configuration, how would be the best way to do that? Could I shut down the websense server, can I just remove this line - "filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow"...
Internet ---- ASR ------ Switch ------- ASA 1 (active) | | | | |---------- ASA 2 (standby)ASR supports BDI ...
I have an ASA 5585 in transparent mode, multi-context. It seems that the option to configure a BVI in one of the traffic contexts isn't there. In other words, while I see the option to configure a bridge group interface in the admin context, no such ...
Hi Everyone,I am trying to find the IP of network object.when i ran the command --sh run object-group network --- it showsobject-group network XYZnetwork-object Cisco_1 255.255.255.0Need to find the IP of this Cisco_1?ThanksMahesh
I found the following rule on an ASA:Source Destination ServiceMarketing any tcpDoes this mean that marketing can access any tcp service since it doesn't specify one (http-80 or https-443 for example)?When I move the mouse...
Hello guys!Tomorrow I will be creating a rule that needs to be applied to both of our ASAs. Is there a way within ASDM to push that rule onto the other ASA? Or do I just log into the other ASA and create the same rule?Thanks in advance!
Hi,I went through similar posts to this one but I didn't find the answer I am looking for. I'll explain what I am trying to do:I have a DMZ (50) from where I need to allow some protocols to inside zone (level 0). I am doing that with ACL, but after h...
Recently my csm 4.4 stopped getting updates for IPS, I get this error: "certificate on server has changed from that viewed and accepted by user" (picture). I found this one https://supportforums.cisco.com/thread/2193364 but root on my version of csm...
Hello Experts, We have CSM 4.3.0 Service Pack 1 on our Windows Server 2008, Standard Edition. During the initial installation, we mistakenly setup Windows 2008 Standard Edition instead of Enterprise Edition. Now we must have to upgrade to Enterprise ...
Hi All, I need to allow one of the vendor to park their server in our network and plan to place it in DMZ zone, but the server need secure access back to their DC and we need to publish and pull data to/from the server Am wondering is it a good idea ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 11-13-2025 12:52 PM | ||
| 11-03-2025 09:48 AM | ||
| 10-30-2025 12:44 PM | ||
| 10-23-2025 07:14 AM | ||
| 09-26-2025 12:33 AM |
| User | Count |
|---|---|
| 4 | |
| 3 | |
| 3 | |
| 2 | |
| 2 |
