Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hi,Design Description:We have a 6500 series switch where my ISP Point-to-Point link got terminated. Where we have configured OSPF on the 6500 series switch to have all the roots from ISP.We are getting 3 numbers of /24 public IP subnet Pool for my se...

pandapritam by Community Member
  • 2179 Views
  • 1 replies
  • 0 Helpful votes

We are the getting below log messages from our 5520 ( 8.4.2 - HA pair) and they are failing over to each other. what causes this error and Is there any work around for this.May 25 2012 08:21:27: %ASA-4-411005: Interface GigabitEthernet0/2 experienced...

HiWonder if someone can shed some light.Have the followingSITE A                                                                                                                                                         SITE BFW1 network 192.168.0.1 255...

CT_Dude by Level 1
  • 1516 Views
  • 5 replies
  • 0 Helpful votes

                   i have a pix 501 that i cannot get working properly. i plug in the cables and console as directed and it will show that I am connected to the internet but I do not have access to the internet.   I have no idea what is wrong. we use...

LLueken1985 by Community Member
  • 1163 Views
  • 3 replies
  • 0 Helpful votes

                   We set up botnet filtering yesteray.  We have about 300 users behind the ASA-5510.  What a great tool!  But, the filter claims that we have about 70 "infected machines".I investigated some of the IPs, like 173.194.79.99.  That IP b...

Hi Cisco,How we can see the detail of the Cisco IPS signature. If i want to see the the prriority(High/Medium/Low) of latest signature.E.g if i upgrade my IPS sensor with Latest signature and i want to see what are the High or critical signature Cisc...

Hi,I have some qeustions about making an ASA accessiblr from the outside. At our clients we want to make the ASA's accessible from the outside so if the VPN tunnel goes down for any reason we are still able to access the ASA from the outside with htt...

I need to configure my asa as follows: Two active ISP´s, one(ISP1) for outbound traffic (normal internet traffic) and the other one for inbound traffic(ISP2), http to a web server in the inside network. I have two default routes, one pointing to ISP ...

Unimoreno by Community Member
  • 1133 Views
  • 1 replies
  • 0 Helpful votes

Hello.  I have a video conferencing codec installed behind a customers ASA 5500 (8.2.4).  The codec has a private IP address and a static one-to-one NAT with a public IP has been configured for it in the ASA.  All the appropriate ports for H323 video...

Top Solution Authors
Review Cisco Networking for a $25 gift card