Hello,We have added another outside network on int 0/3, but we can't get the NAT working. Any request from that subnet on that new int 10.40.86.xx to lets say 10.40.86.31 port 80 which should NAT to 172.30.1.31. The setup is pretty much the same as t...
The download site shows ASA image asa805-23-k8.bin as being exactly the same size (and same date) as asa805-20-k8.bin. Does anyone know if the wrong file has been posted for asa805-23-k8.bin?ThanksMike
Hello,i have a 2811 router with IOS 12.4(15)T10 where wccp enabled on the router to divert the traffic to waas appliance.recently i add the Zone base firewall configuration, but caused some problems from communication from outside traffic.if wccp alo...
Could this be a hardware problem like a DRAM problem because this unit has been working for a while with no problem and today it keeps crashing every few minutes and rebooting. There has been no changes made.sh crashinfo : Saved_CrashThread Name: lu_...
Hi All,I doing a lab with a ASA 5510 with a 2590 switch and I would like see a simple code example doing intervaln routing cisco asa 5510.Now in my lab isn´t not working. Do it have some secret ??Antonio
Hi, I have the information to downgrade an ASA 5505 from 8.3 to 8.2, in this case i have too the image 8.2, but when i like to downgrade appear a dashes with ASA Image where say Select Image File and I cant understand what i have to fill in this ...
I'm not sure if this is the best location for this discussion. I want to make sure that my group policy objects are working to deny users the ability to use proxy servers to browse the web which would bypass my non Cisco content filter. How can I d...
Estimados,Quiero realizar un downgrade a un ASA 5505 de la version 8.3 a la version 8.2, ya tengo la imagen pero en el ASDM no puedo definir que datos debo llenar en la pestañas ASA Image, Configuration cuando quiero realizar el downgrade, por favor ...
Hi,Can anyone please help with the following:1. a firewall configuration that would allow me ping both the inside & outside interfaces of the ASA 5505 firewall from PC1 and PC2 as shown in the attachment. I have tried to configure this several time b...
hi allif i upgarde my existing asa image 8.0.3 to 8.2 or 8.3 .can i copy paste my existing configs or are threre any differece in nat commands .?do i need to change syntax of nat / route / vpn related / failover commands after upgradation ?thanks
Dear All,I have Windwos Server 2008 R2 and Cisco ASA 5505.I configured ASA and when i try my publick IP i can connect it using annyconnect VPN. I also can ping ASA's inside interface but i can not access server.I also configure RAIUS server on my ser...
Hi Guys,I havea number of contexts on my ASA5520's runing OS 8.3. I've created a capture in the admin coontext that I'd like to download to view in wireshark.Previously I've done this using the copy /pcap capture: command on ASAs in signle context mo...
Just want to check, is there a command that will compare configuration of Active and Standby unit or at least indicate out of sync configuration. For some reason I think there was or is...
Hi all,I have a problem with url filtering.i can't configure the asa to allow only maps.google.com for a specific subset of users and allow all websites for the rest.the goal is if 192.168.3.2 can reach only maps.google.com and the all of other host ...
Hi all,I have got cisco 2800 series router. I need to install IPS on it. Have come accross AIM and NME. Can someone shed more light on the difference and pros/cons of them.Regards,BWS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM | ||
| 04-22-2026 11:56 AM |
