Network Security

helloI have to link 2 networks with the same IP network.each IP network is on a séparate FWSMcould you help me for the configurationnat , global , static

Hi all,I have 2 public ip range from isp. 1range is 1.1.1.0/30(eg) where 1 ip address is used on the isp end while the other is configured on my pix.The other ip range is 2.2.2.0/28(eg) which is a bigger ip range which i can use for my publicly acces...

Hi,Currently I have 2 router runing on site to site IPSec VTI. I would need help to configure firewall to :1. To allow private network to access internet.(I do not need to inspect the traffic going to the internet.)2  To protect my private network fr...

Hello everyone,I have 2 redundant layer 3 switches which are connected to the core router. The switches are also connected to the redundant firewalls. ISP Network       |       |       |       |   Core Router        |       |       |       |Redundant...

We have a main offfice and remote office on different ISP's - both behind ASA-5510s. Main office is a 192.168.200.xxx subnet, remote office is 192.168.210.xxx. Offices were connected through a point to point vpn on the ASAs. We now have a direct laye...

On IME version 7.03 the root and anonymous user has been deleted and created another user with encrypted password.Does somebody know the new user and password for this MySQL database ?Here´s the new features on readme files 7.0(3)IME 7.0(3) introduce...

Hi,I'm trying to set up a pair of ASA 5510's in active/standby mode, and I've hit a bit of a problem. I've completed the following steps:1. Out of the box, i've used the configure factory-default <ip-address> <subnet mask> to set an IP address on the...

Hi all,Just after some opinions or, even better, experience.The web proxy server where I work currently exists within the organisations internal LAN structure (ie. traffic going to the proxy server from within the organisation does not cross the fire...

My ASA 5510 Suddenly stopped working - now it hangs in this boot loop.After 5 attempts to boot it hangs.I have tried hardware reset. Nothing happens.Any help appreciatedBooting system, please wait...CISCO SYSTEMSEmbedded BIOS Version 1.0(11)4 03/21/0...

I am have problems connecting to my webpage (NAT) after setting up VLANing of my network. I have a PIX515 that is connected to a 4507 switch. I have everything VLANed off at the 4507 and divided off into10.20.0.0 /20 subnets. 10.20.0.0 - 10.20.15.255...

If I have asa is 4 units, I can do active/standby in the same group or not???

Hello,I am kinda new to firewalls and what i'm trying to do is the following:Old situation:One subnet for everything, ASA 5520 INSIDE 192.168.0.241  > 3560 192.168.0.240 > Several 2950 on 192.168.0.xNew situation:ASA 5520 INSIDE 192.168.0.241 >>> 356...

Dear All,i have idsm with IPS-K9-7.0-2-E3.pkg installed,i use inline mode for this idsm, and idsm place is front on server farmbut i have some problem that one segment in my network cant access the serverbut another segment can access that server,tha...