Network Security

Hi All,As you know the Cisco PIX 515 3DES License is free as described below from the link https://tools.cisco.com/SWIFT/Licensing/jsp/formGenerator/Pix3DesMsgDisplay.jsp To obtain a FREE PIX Firewall 3DES/AES encryption activation key, all customers...

Hi I am using a ASA 5540 running version 7.2(3) and would like to pass all http and https requests coming from the inside of the ASA to an external proxy server on the internet (All request need to pass to port 8080). I've tried using static commands...

I can't get through the firewall on port 5052. I'm using firezilla and it says that it does not recognize an unroutable address. it works over the vpn so it's something to do with the asa.

Try to understand ASA/PIX traffic order. For example, inbound traffic (non management traffic) will go through flow check,  inbound access-list, nat , filter, outbound access-list, etc. And if it's returned traffic and session is existed, what the fi...

Hi TeamI am facing a problem with my cisoco ASA policy:I am running ASA version 8.0(4)My config is as lollows:interface Ethernet0/0 nameif inside security-level 100 ip address 10.38.100.162 255.255.255.0interface Ethernet0/1 nameif outside security-l...

Hi,In our setup we have configured LAN base failover in ASA5550 firewalls in Active/Standby mode.Yesterday automatic failover happened and secondary become active and primary in standby mode.When we checked the primary firewall we found that it was r...

Hi all,I just recently brought up SSL VPN for our company but I am not sure how to publish some of the shared folders under the Profiles. Could someone please guide on how to plush folders and links to, for example, the SharePoint server?Thanks in ad...

Good day. I want to know about IPS license and updates part number. We have delivered the box IPS 4240 K9 to customer, yet , we do not have the license and updates facility. We opened up the TAC SR: 613250439 case and it was suggested that we need to...

I’m looking for a solution to use multiple t1’s and round robin my traffic thru them via my asa5505.  I have managed solutions from AT&T all individual T1’s which I’ve had them configure with the fe0/0 all on the same network but with different IP’s ...

Has anyone deployed it?  Is there any gotchas as opposed to 4.6.1?  I know it supports Windows 7 and Snow Leopard.  I had read that 4.7 only intruduuced FIPS compliance and disabled some of the functionality.  Look like I may have to go to it to supp...

There is a scrubbed config file at the end of this post.       Symptoms:   Some hosts connected to the inside interface cannot reach websites or even ping our gateway, but some can.   They can ping the LAN's gateway and other hosts on the inside, as ...

Hello1)what is the function of this module:CSC-SSM? and how it connect physicaly  to network?is it on the inside or outside or DMZ?2)if i have 2 asa for hight availability ,do i need to have 2?Please explainThanks

Dear All,i am trying to telnet from my firewall to router through command promt....it gives me a black blank with a - .....what are the parameters to be configured to access the router.Regards,

I am with a problem in one of the firewalls of my company. - Almost everyday the firewall stop working and I need to restart it because I lose the remote access; - This is a ASA 5505 with 7.2.4 firmware; - There is a configuration default that I use ...