Network Security

Hello, my asa 5510 does not boot, it has the status led in solid amber color ("The power-up diagnostics have failed" in teh manual), and I can not connect to any console.What can I do? thanks

I have a question for pix Firewall gurus in this forum. I do not have a pair of UR Pix firewall to test thisso I have to ask.Scenario:inside network: 192.168.1.0/24outside network 129.174.1.0/24default gateway for inside network: 192.168.1.1default g...

Hi, I have just upgraded from a PIX to 2xASA 5520 in active/stanby mode. When I go into the IPS via the ASDM it only shows me a URL which doesn't work and mentions that I have version 1.5 and 1.6 would be integrated into the ASDM. How can I do this? ...

I am attempting to import an SSL certificate on my CCA Manager and Server. I purchased a wild card SSL cert *.domain.com. The private key used to generate the certificate was created on an Cisco ACS 3.2 server and has a password. When attempting to i...

Anyone know why? When I perform "show access-list 12", line 30 appears before line 10, see below:VPN_1(config)#line vty 0 4VPN_1(config-line)#no access-class 12 inVPN_1(config-line)#exitVPN_1(config)#no access-list 12VPN_1(config)#access-list 12 perm...

Dears,i have Firewall with 4 ports FE is configured as transparent mode..... how many interfaces i can configure in this mode.i heared just one output interface and one input interface i can configure in this mode...is that true?or can i configure 2 ...

I have an ASA5505 that is not running the Security Plus License. I am limited to 3 Vlan's. I need to add the 4th vlan. If I upgrade to the Security Plus License, do I need to do trunking to allow for additional vlans? Or am I permited to create the 4...

sh monitor-interface This host: Secondary - Active Interface a (1.2.3.4): Normal Interface inside (1.2.4.5): Normal Interface outside (1.2.5.6): Normal Other host: Secondary - Standby Ready Interface a (1.2.3.5): Normal Interface inside (1.2.4.6): No...

Hi,We are using VPN client to connect to our network via internet. We are using local authentication method to authenticate the users. Local username and passwords have been configured.Is it possible to redirect the authentication to AD server and ge...

Hi,Im working on a way to monitor our FWSM interfaces and find out that the SNMP is good way for that. Anyway, I've tried also to monitor the FWSM using ping coming from a server on the inside interface to all other interfaces with lower security lev...

I have an external router set up for Netflow with a destination ip address of an internal host which has the netflow Analyzer software on it. I have mirrored the configuration on the inside router which is talking just fine with the Netflow server. I...

Can u please tell me how to configure IPS in cisco router and how to upload the signature to the router...please give the logical explanation and comman line for the same. Please suggest me.Thanks Dhiman

I have an ASA 5520 running in transparent mode with a number of hosts inside the firewall and they're all fine. Adding new ones are fine, except for a pair of Dell PE1950s running Windows 2003 Server x64. These boxes can connect to the hosts behind t...

We are trying to put together a solution that would permit our 1842 (that connects to the Internet via a sprint wireless card) that once started will automatically connect to a VPN setup on a PIX 515 at our corporate office. I know that we will need ...