Can’t save Cisco ASA configuration in GNS3 via write memory command

7632

Views

Helpful

Replies

Hi all,

I’m having a problem to save Cisco ASA configuration in GNS3 via write memory command.

ciscoasa(config)# wr mem

Building configuration…

Cryptochecksum: c066a7ab b5b9071e bb5ee1f6 2d93be53

%Error copying system:/running-config (Not enough space on device)

Error executing command

[FAILED]

ciscoasa(config)#

Here are the details of the lab setup.

PC DETAILS:

Windows 7 Enterprise SP1 64bit

GNS3 v0.8.6 all-in-one (installer for 32-bit and 64-bit which includes Dynamips, Qemu/Pemu, Putty, VPCS, WinPCAP and Wireshark)

ASA DETAILS:

13,279,888 asa802-k8.bin.unpacked.initrd

1,095,856 asa802-k8.bin.unpacked.vmlinuz

Please advise. Thanks in advance.

5 Replies 5

change the interface type from e1000 to pcnet

Tried that it's not working for me :(

instead of this:

To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\FLASH 256M

try this:

To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\User\usuario\GNS3\FLASH 256M

Let me know if is helpfull.

http://7200emu.hacki.at/viewtopic.php?p=34550&sid=400d9ebdbbb4e7eceedc345903dd0faa

Try formatting the disk0 partition and reloading:

format disk0:
reload

That worked for me

this worked for me too!
thx