02-19-2014 06:41 AM - edited 03-11-2019 08:47 PM
Hi all,
I’m having a problem to save Cisco ASA configuration in GNS3 via write memory command.
ciscoasa(config)# wr mem
Building configuration…
Cryptochecksum: c066a7ab b5b9071e bb5ee1f6 2d93be53
%Error copying system:/running-config (Not enough space on device)
Error executing command
[FAILED]
ciscoasa(config)#
Here are the details of the lab setup.
PC DETAILS:
Windows 7 Enterprise SP1 64bit
GNS3 v0.8.6 all-in-one (installer for 32-bit and 64-bit which includes Dynamips, Qemu/Pemu, Putty, VPCS, WinPCAP and Wireshark)
ASA DETAILS:
13,279,888 asa802-k8.bin.unpacked.initrd
1,095,856 asa802-k8.bin.unpacked.vmlinuz
Please advise. Thanks in advance.
08-20-2014 04:20 AM
change the interface type from e1000 to pcnet
08-21-2014 10:03 AM
Tried that it's not working for me :(
PL
02-06-2015 07:11 AM
instead of this:
To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\FLASH 256M
try this:
To create a flash file
cd "C:\Program Files\GNS3\qemu-2.1.0"
qemu-img.exe create c:\User\usuario\GNS3\FLASH 256M
Let me know if is helpfull.
04-19-2015 01:35 AM
http://7200emu.hacki.at/viewtopic.php?p=34550&sid=400d9ebdbbb4e7eceedc345903dd0faa
Try formatting the disk0 partition and reloading:
format disk0:
reload
That worked for me
03-20-2016 04:20 AM
this worked for me too!
thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide