cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1166
Views
0
Helpful
1
Replies

Cisco ASA 5505 Routing between internal networks & allowing remote ASDM

Gregor_Ai
Level 1
Level 1

As the subject suggests.  I believe the issue lies within my NAT/DHCP pool configuration.

I can currently connect via anyconnect, but the VPN pool cannot talk to any other internal network, nor can I access ASDM.

When plugged into any of the inside interfaces, I cannot access the internet. 

 

Ultimately the config should allow VPN users 192.168.0.0/24 access to the internal network 192.168.1.0/24

 

Attached running config.

 

 

1 Reply 1

balaji.bandi
Hall of Fame
Hall of Fame

On high level look you do not have ACL for access internal resource for that VPN IP range

Look at the below guide for reference to create one and test and advise.

https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70847-local-lan-pix-asa.html

 

in the post you mentioned 192.168.0.0/24 but in the config object group /27 change that too.

 

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Review Cisco Networking for a $25 gift card