07-14-2004 08:07 AM - edited 02-20-2020 11:30 PM
Where am I missing this? I know it is possible to copy a pix config down via Tftp using the
wr net tftpIP :filename
How do I do the reverse, copy the startup-config to the pix via tftp.
Easy to do it with a router or switch. I don't see any docs on CCO that specify where to copy the startup-config.
Solved! Go to Solution.
07-14-2004 01:58 PM
Hi
Use the Config net command
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/c.htm#wp1055799
Thanks
Nadeem
07-14-2004 01:58 PM
Hi
Use the Config net command
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/c.htm#wp1055799
Thanks
Nadeem
07-15-2004 05:44 AM
config net... wow! would have never thought of that one. I had gone crazy searching for copy/write net,etc.
Guess all the years of using routers and switches with the various tftp statements has brain washed me. :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide