Copying config from Pix to TFTP

[yokby]

Hi,

What is the commands or PDF that explains how to copy your config from PIX to tftp and then back to the replacement pix.

Thanxs

Cisco PIX Firewall Version 6.3(1)

[sachinraja · Accepted solution]

hi Yokby,

welcome to netpro.

You can login to the PIX via CLI, and use the following command:

write net

Give the IP address of the TFTP server when prompted.

You can use the following command to copy from the tftp server to the PIX:

configure net

give the location and file name when prompted.

All the best.. rate replies if found useful..

[jpcastro]

The command configure net should be executed in global configuration mode.