03-20-2017 03:46 AM - edited 03-12-2019 02:05 AM
Hello,
I have two pools DHCP pools configured on the ASA Firewall, the clints on two different WLAN Networks are getting the IP addresses from the same pool sometimes they get it from the right pool sometimes from the other pool, on the WLAN controller i have also configured the DHCP overirde to relay the DHCP requests to firewall. the IP address assignment behaviour is not consistent which is a bit strange.
03-21-2017 02:15 AM
How are your WLAN interfaces and your pools configured?
03-21-2017 04:54 AM
Two DHCP Pools are configured on the Firewall.
WLAN interfaces are tagged in respective VLANS i have also configured DHCP server under interfaces in WLC and also the DHCP overide option, the clients always get the IP address from the same pool, DHCP Proxy option is also enabled on the WLAN Controller
03-22-2017 12:45 AM
Hi,
Why are you using DHCP pools on the firewall and Controller? you should use either one and not both. I don't think the asa firewall can accept dhcp requests relayed to it. The asa requires clients to be directly connected to the interface.
Thanks
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide