09-29-2006 08:57 AM - edited 02-21-2020 01:12 AM
I'm working on one of our lab 515 firewalls testing a config change that I'll be pushing out. I pulled the config off of the production box and pasted it into the lab. Now on the box I'm getting the following error message, which probably doesn't do anything except cause a slight annoyance. Has anyone else seen this and what can I do to fix it.
WARNING: unable to add route to OSPF RIB
Thanks
Eli
09-30-2006 09:31 PM
Ive seen that error message a lot when an engineer overlooks their static statements.
since we cannot see your config, take a look at it yourself and see if there is a misconfiguration.
10-03-2006 08:48 AM
Well so far after working a bit more with this problem I see it happening even after only the most basic commands on a new config. Here's the basics of what I've done so far sans the public ip. This isn't really a big deal because so far the only system I'm getting this on is this lab box that I'm copying the configs of production boxes onto to verify future config changes.
pixfirewall(config)# interface ethernet0 auto
pixfirewall(config)# interface ethernet1 100full
pixfirewall(config)# interface ethernet2 100full
pixfirewall(config)# interface ethernet3 100full
pixfirewall(config)# interface ethernet4 auto shutdown
pixfirewall(config)# interface ethernet5 auto shutdown
pixfirewall(config)# nameif ethernet0 outside security0
pixfirewall(config)# nameif ethernet1 inside security100
pixfirewall(config)# nameif ethernet2 dmz1 security4
pixfirewall(config)# nameif ethernet3 dmz2 security6
pixfirewall(config)# nameif ethernet4 intf4 security8
pixfirewall(config)# nameif ethernet5 intf5 security10
pixfirewall(config)# ip address outside x.x.x.x 255.255.255.224
pixfirewall(config)# ip address inside 192.168.39.251 255.255.252.0
WARNING: unable to add route to OSPF RIB
pixfirewall(config)# ip address dmz1 172.17.36.1 255.255.255.0
pixfirewall(config)# ip address dmz2 172.17.37.1 255.255.255.0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide