11-02-2017 09:02 AM - edited 02-21-2020 06:37 AM
I am having this issue when I try to place an object-group on my OUTSIDE-IN ACL. I am not sure why I am receiving this error?
Here is the Object-Group
# sh run | begin INT_BLOCKED_IPs
object-group network INT_BLOCKED_IPs
description Blocked_International_IPs
network-object 62.210.0.0 255.255.0.0
network-object 37.187.0.0 255.255.0.0
network-object 46.29.160.0 255.255.248.0
network-object 195.154.0.0 255.255.0.0
network-object 93.115.24.0 255.255.248.0
network-object 54.36.0.0 255.254.0.0
network-object 134.119.128.0 255.255.128.0
network-object 185.107.80.0 255.255.252.0
network-object 46.17.40.0 255.255.248.0
network-object 62.141.32.0 255.255.240.0
network-object 62.4.0.0 255.255.224.0
network-object 213.163.97.0 255.255.255.0
network-object 219.148.0.0 255.255.0.0
network-object host 155.94.65.122
network-object host 165.227.116.27
network-object host 107.155.141.130
Here is the error I am receiving.
(config)# access-list OUTSIDE-IN extended deny object-group INT_BLOCKED_IPs
ERROR: Object group INT_ not found
Solved! Go to Solution.
11-02-2017 10:59 AM
11-02-2017 10:59 AM
11-02-2017 11:18 AM
That's what it was!
Thanks for the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide