02-10-2018 03:42 PM - edited 02-21-2020 07:19 AM
Hi,
we are trying to change the app-agent heartbeat of 1000 to 3000 using flexconfig policy on FMC but it is not working.
can anybody help us with that? we did something wrong for sure
Thanks
03-26-2020 07:16 AM
03-26-2020 08:02 AM
Hi,
I don't have a demo HW box to test it out, but i would say it's not gonna work as it shouldn't be supported via FlexConfig. FlexConfig is used to deploy mostly GUI unsupported features (but can be used also for GUI supported features) directly to the Lina(ASA). This heartbeat is a sort of keepalive mechanism used by FTD (not by Lina) to detect backplane connectivity with the FXOS chassis, so i don't see how you could push these settings via FlexConfig.
Regards,
Cristian Matei.
03-26-2020 09:13 PM
Hello Cris,
thanks for your reply..
yes I am completely agree with you and after doing some research, found the below link..
https://www.cisco.com/c/en/us/td/docs/security/asa/asa-command-reference/A-H/cmdref1/a2.html
app-agent heartbeat
To configure the heartbeat message interval for the app-agent (application agent) running on the ASA to check the health of the Firepower chassis, use the app-agent heartbeat command in global configuration mode
The following table shows the modes in which you can enter the command:
Command Mode | Firewall Mode | Security Context | |||
Routed | Transparent | Single | Multiple | ||
Context | System | ||||
Global configuration | · Yes | · Yes | · Yes | — | · Yes |
Thus, what I understood it is CLI command and will work only in Global configuration mode, even not in context mode only on system mode....
Thanks for your quick reply..
Appreciated..
5++ start from me..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide