11-14-2023 07:11 AM
Hi ,
in case i need to implement LLDP in Firepower 2140 how can i configure this?
I can not find any lldp commands in interface menus.
I see it is supported in FTD 1100 but i can not find ny relevant command in 2140 .
Thanks,
Ditter
Solved! Go to Solution.
11-14-2023 07:27 AM
Until 7.2 not that i have seen that option.
11-14-2023 07:30 AM - edited 11-14-2023 07:32 AM
You run 7.1 or less
If yes then it only for fpr 1k
From 7.2 and above it available for fpr 2k
11-14-2023 07:27 AM
Until 7.2 not that i have seen that option.
11-14-2023 07:29 AM
Thanks,
i am in version 7.0.5
11-14-2023 07:30 AM - edited 11-14-2023 07:32 AM
You run 7.1 or less
If yes then it only for fpr 1k
From 7.2 and above it available for fpr 2k
11-14-2023 07:58 AM
You can enable LLDP on Firepower 1000 Series, 2100 Series, and Secure Firewall 3100.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide