How to add new subnets to VPN group

[boots]

Hello,

I'm running version 8.04 on the ASA5510 and would like to add new subnets to the VPN network group. Please point me in the right direction.

Thank you so much!

[fedecotofaja]

Hi,

Do you mean that you have a pool of addresses being given to the VPN clients on the ASA and now you want to add more pools with different address ranges? Or maybe I'm not understanding what you're trying to do, please explain. Thank you.

[boots]

I created two new vlans on the internal network (10.20.1-2.0/24). Currently, users can not access these two subnets once they logged into the VPN. I need to make these two new subnets available via the VPN.

Hope this is making sense.

Thanks again,

[fedecotofaja]

Hi,

To allow the VPN clients to access the internal subnets you need two things:

1. The internal subnets should be in the split tunnel ACL (if you're using Split tunneling).

2. The internal subnets should be in the nat0 statement for the VPN traffic.

Check that you have those statements correct and if the problem persists, perhaps you can share part of the config...