How to configure cisco firewall fpr 2120

[mohanjoy23]

Hello all,
 
 I need your support. How to configure the cisco firewall fpr 2120. Now it is configured in ASA mode

[Kasun Bandara]

Hi,

here you can find the way to quick deploy the device according to your management method.

https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/fp2100/firepower-2100-gsg.html

rate and mark as answer, if this solved your issue

[mohanjoy23]

Thanks for your support,

Actually, the requirement is I want to configure the cisco firewall fpr 2120 configure. Now it is configured in ASA mode, but there I cant use the IDS/IPS modul. The FTD mode is available on the server, but I don't know that how to use the web interface to configure on FTD mode. I could not use CLI. In the CLI I can check only the configuration. Kindly check the below screenshot.

  

[Marvin Rhoads]

When your Firepower 2120 is running ASA mode, it needs to be reimaged to switch to FTD mode. Please see this document for detailed instructions:

https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/reimage/asa-ftd-reimage.html#topic_jfq_v1k_rz

Of course this will erase any existing configuration.

Note that running FTD will also require licenses - Base license at a minimum and Threat license to use the IPS features. URL Filtering and Malware license are also available. You can start off running a 90-day evaluation license.