Link down in rommon

[Gene Everhart]

When I enter into rommon mode to upload an image, the link is down on my interface to set up the TFTP. However, I have configured this port for no shutdown. When in enabled mode, the link is up with no further configuration.

Is there a way to make this port stay up when going into rommon mode?

Do I have to do use rommon mode to upload an image on a specific port?

Right now I have port 0/2 setup as my inside port connecting to my pc acting as the TFTP server. Even on the second part of the command it shows the link as up. FYI, I can ping from the ASA to the PC, but cannot ping from the PC to the ASA.

Thanks!

[Marius Gunnerud]

.Where did you get the image from?  I have a feeling that the ASA image you are trying to download is not compatible with the 5510 architecture.

--

Please remember to select a correct answer and rate helpful posts