Locate the SFP serial numbers inside FP2130

[cnegrete]

Hi everyone.

There are ways to obtain the serial numbers from the hardware attached to Cisco devices (show inventory, show interface raw and others depending on the platform), but I haven't find a way to get the SFP serial numbers on a Firepower 2130. Is there any?

Version is 6.2.1

Thanks for your time.

[Marvin Rhoads]

I don't believe this is currently supported.

I just checked on a Firepower 2140 with installed SFPs. Even digging into the FX-OS cli doesn't reveal any way to retrieve that information.

Update/edit: I figured it out. Please see the following:

fw2 /fabric-interconnect # show inventory expand detail | b 13
        Slot 1 Port 13:
            User Label:
            Oper State: Up
            State Reason: Up
            Mac: 70:0F:6A:5D:B5:90
            Oper Speed: 10 Gbps
            Oper Duplex: Full Duplex
            Xcvr: 10G SR
            Xcvr Model: SFBR-709SMZ-CS1
            Xcvr Vendor: Cisco Systems, Inc.
            Xcvr Serial: AVD22079JV2

        Slot 1 Port 14:
            User Label:
            Oper State: Up
            State Reason: Up
            Mac: 70:0F:6A:5D:B5:91
            Oper Speed: 10 Gbps
            Oper Duplex: Full Duplex
            Xcvr: 10G SR
            Xcvr Model: SFBR-709SMZ-CS1
            Xcvr Vendor: Cisco Systems, Inc.
            Xcvr Serial: AVD22079JUB

[Vishnu_RR]

Hi,

Is there any way to get the SFP details in FMC?

[Marvin Rhoads]

No - not as of the current FMC version 7.1.

[alex.f.]

Hi,

for the Cisco FPR 2130 on v7.2.2 FX-OS v2.12.0 (build 1104)

I did the following to find out the SFP Model and SN:

(via SSH to CLI)

>connect foos

firepower# show fabric-interconnect inventory expand detail

(you can use Pipe for filtering your output)