08-14-2018 09:34 AM - edited 03-12-2019 06:53 AM
Hi everyone.
There are ways to obtain the serial numbers from the hardware attached to Cisco devices (show inventory, show interface raw and others depending on the platform), but I haven't find a way to get the SFP serial numbers on a Firepower 2130. Is there any?
Version is 6.2.1
Thanks for your time.
08-15-2018 12:09 AM - edited 08-15-2018 01:18 AM
I don't believe this is currently supported.
I just checked on a Firepower 2140 with installed SFPs. Even digging into the FX-OS cli doesn't reveal any way to retrieve that information.
Update/edit: I figured it out. Please see the following:
fw2 /fabric-interconnect # show inventory expand detail | b 13 Slot 1 Port 13: User Label: Oper State: Up State Reason: Up Mac: 70:0F:6A:5D:B5:90 Oper Speed: 10 Gbps Oper Duplex: Full Duplex Xcvr: 10G SR Xcvr Model: SFBR-709SMZ-CS1 Xcvr Vendor: Cisco Systems, Inc. Xcvr Serial: AVD22079JV2 Slot 1 Port 14: User Label: Oper State: Up State Reason: Up Mac: 70:0F:6A:5D:B5:91 Oper Speed: 10 Gbps Oper Duplex: Full Duplex Xcvr: 10G SR Xcvr Model: SFBR-709SMZ-CS1 Xcvr Vendor: Cisco Systems, Inc. Xcvr Serial: AVD22079JUB
12-23-2021 04:05 AM
Hi,
Is there any way to get the SFP details in FMC?
12-23-2021 04:34 AM
No - not as of the current FMC version 7.1.
03-09-2023 06:50 AM - edited 03-09-2023 06:50 AM
Hi,
for the Cisco FPR 2130 on v7.2.2 FX-OS v2.12.0 (build 1104)
I did the following to find out the SFP Model and SN:
(via SSH to CLI)
>connect foos
firepower# show fabric-interconnect inventory expand detail
(you can use Pipe for filtering your output)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide