cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
1
Replies

Long boot time using a urlfilter with a ZBF

slauzon
Level 1
Level 1

Hi all,

I have a weird problem, when I am using the whitelist/blacklist on a specific zone on the Zone Based Firewall, I have a boot time of 8 minutes prior to be able to log on the router using the console port. If I remove the url-filter, the boot time drop at 2 minutes, it's a 6 minutes difference. We also have a similar problem if we want to add another site to the whitelist.

We are using a 881G and 891 using the ios 150-1.M3

Thanks for your help on the subject.

1 Reply 1

slauzon
Level 1
Level 1

It seem that if you remove the service-policy urlfilter from your policy-map, you can now do your change without any problem. The more pattern you have in your parameter-map for your whitelist, the more time it will take for the change to be applied. This don't solve the boot time issue but if I have only one pattern, I don't have any long boot time.

The question I have now, is there a maximum of pattern you can apply to your parameter-map or a recommended maximum?

Thanks

Review Cisco Networking for a $25 gift card