Hello All,
The configuration for the natting is something like this
object network Obj-10.232.50.99
nat (INSIDE,ATT-Tele-Net) static 32.x.x.69
object network Obj-10.232.50.98
nat (INSIDE,ATT-Tele-Net) static 32.x.x.66
when I do a show xlate
mdcxf01b/EXTRANET# sh xlate | i ATT
NAT from INSIDE:10.232.50.98 to ATT-Tele-Net:32.x.x.66
NAT from INSIDE:10.232.50.99 to ATT-Tele-Net:32.x.x.69
mdcxf01b/EXTRANET#
If I understand the config statements 10.232.50.98 is natted to 32.x.x.66 and 10.232.50.99 is natted to 32.x.x.69 , but do we need reverse natting stements as well to work this ?
Thanks,
Josh
