Thanks for the link. I had been to that area but was confused on the selection and thought that was just for PIX software and not PDM as well. I was able to get PDM 3 downloaded and installed. Now when I try to launch https, I get a little further than before. It gets through initial PDM sign on and a littler PDM windows appears that shows hostname, device, pdm version, java, etc and also says at the bottom Please do not close this window and another window will launch. Another window never launches.
What I am looking at using this PIX 501 for would be firewall/router for internet access. We provide "public internet" at our sites and are currently using an old Netgear FR114p to provide the internet access and DHCP. We have a VLAN we use for this and the internet traffic for this does not go through our Firewall (asa5520), its just straight out to internet. This netgear has been running great for over 5 years but is starting to require frequent reboots. I believe we may be taxing it more now too. When I found this PIX 501 on the shelf, I thought this might be a good alternative.
Thanks for any advice.
