09-15-2003 09:13 AM - edited 02-20-2020 10:59 PM
Hi,
Im stuck on a little problem. I'm setting up a brand new 506E firewall. When I try to specify an internal IP for my interface I get the following error, "interface address is not on the same subnet as the dhcp pool" I've disbaled the DHCP server on the firewall, but it still gives me that error. The second thing when I load the PDM version 3.0.1 under device information license it says not applicable, is there something I need to do to enable the license??
Any help would be greatly appreciated.
Thanks
09-15-2003 09:24 AM
Hello -
Please check this document for a quick start up giude to PIX 506E - This document is a PDF.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_62/qsg/506quick.pdf
Hope it helps - Thanks Jay.
09-15-2003 09:40 AM
What I always do with the pix 501 and 506 is to do a write erase and start fresh.
09-15-2003 06:21 PM
PDM requres at least DES key be installed. I concur withh the others. I ALWAYS do write erase and reload then start with my config. I also never use the script.
09-16-2003 12:55 PM
Great thanks guys, I guess i'll erase my config. What about the license part in PDM? It says its not applicable, will that cause me any problems?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide