cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
309
Views
10
Helpful
3
Replies

Radware DefensePro and Firepower 4112

Chess Norris
Participant
Participant

Hello,

I have a customer with a Firepower 4112 appliance with a FTD instance and they have asked me if it's possible to run an additional instance of Radware DefensePro in the same chassis. Anyone know if that's supported on the 4112? 

I'm only able to find information about support for the older 4100 series models like the 4120 and 4140 but nothing about the newer 4100 models like the 4112. 

When trying to add a new logical instance in the chassis manager, we only saw the option for ASA and FTD but we're not sure if we first need to download the image and upload it from chassis manager. 

Thanks

/Chess

1 Accepted Solution

Accepted Solutions

Marvin Rhoads
VIP Community Legend VIP Community Legend
VIP Community Legend

Yes, it is supported as of FX-OS 2.8.1 or later.And, yes, you must upload the Radware DefensePro image to the chassis manager to get started.

Reference:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html#id_59121

View solution in original post

3 Replies 3

marce1000
VIP Mentor VIP Mentor
VIP Mentor

 

 - Not mentioned in https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/radware/radware_ftd_qsg.html#pgfId-128248 , you may need to engage with TAC to confirm, 

 M.

Marvin Rhoads
VIP Community Legend VIP Community Legend
VIP Community Legend

Yes, it is supported as of FX-OS 2.8.1 or later.And, yes, you must upload the Radware DefensePro image to the chassis manager to get started.

Reference:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html#id_59121

Thanks for the confirmation, Marvin.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers