Radware DefensePro and Firepower 4112

[Chess Norris]

Hello,

I have a customer with a Firepower 4112 appliance with a FTD instance and they have asked me if it's possible to run an additional instance of Radware DefensePro in the same chassis. Anyone know if that's supported on the 4112? 

I'm only able to find information about support for the older 4100 series models like the 4120 and 4140 but nothing about the newer 4100 models like the 4112. 

When trying to add a new logical instance in the chassis manager, we only saw the option for ASA and FTD but we're not sure if we first need to download the image and upload it from chassis manager. 

Thanks

/Chess

[marce1000]

 - Not mentioned in https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/radware/radware_ftd_qsg.html#pgfId-128248 , you may need to engage with TAC to confirm, 

 M.

[Marvin Rhoads · Accepted solution]

Yes, it is supported as of FX-OS 2.8.1 or later.And, yes, you must upload the Radware DefensePro image to the chassis manager to get started.

Reference:

https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/compatibility/fxos-compatibility.html#id_59121

[Chess Norris]

Thanks for the confirmation, Marvin.