SNMP v3 setup on Firepower for monitoring.

[Garry Cooper]

I want to monitor our 4120 firepowers in Solarwinds. (snmp monitoring)

Have setup the snmp settings in FMC and also tried on FTD gui, but cannot get the monitoring station to connect.

TIA

[Rob Ingram]

@Garry Cooper you configured SNMP in Platform Settings Policy and assigned to the FTDs?

https://www.cisco.com/c/en/us/td/docs/security/firepower/70/configuration/guide/fpmc-config-guide-v70/system_configuration.html#concept_E5AF6D5320C64886BEA5E11713004B5D

[Garry Cooper]

Thanks Rob.

But I had already followed them to the letter.

Enabled in FMC and the ACL, enabled in FTD Chassis but still the same.

[MHM Cisco World]

https://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/213971-configure-snmp-on-firepower-ngfw-applian.html#anc24

check this and check how you can test SNMP in FTD

[Garry Cooper]

Thanks for the reply...MHM Cisco World.

Followed that to the letter, but it looks like I need to contact TAC.

I have setup the snmp v3 using the Device Management Interface. as per the doc.

Tried to troubleshoot this but only thing I can see from the FXOS CLI is this

show running-config snmp all

snmp-server context mgmt vrf management

[MHM Cisco World]

can I know the version you use 

[Garry Cooper]

We are on 7.0.4 build 55