11-11-2017 09:25 PM - edited 02-21-2020 06:43 AM
Hi Guy's
I'm having some issues connecting to my ASA via SSH, the session connects but gives error regarding credentials. This seems strange as I have access to ASDM and I have allowed SSH connections from the correct subnet but the username and password with privilege 15 is failing?
Here's my configuration
!
!
hostname LAB-ASA-01
domain-name LAB.ACME.LOCAL
enable password 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0/0
channel-group 1 mode active
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/1
channel-group 1 mode active
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
!
interface GigabitEthernet0/5
description VLAN2
nameif VLAN2
security-level 90
ip address 10.0.2.1 255.255.255.0
!
interface Management0/0
management-only
shutdown
no nameif
no security-level
no ip address
!
interface Port-channel1
no nameif
security-level 90
no ip address
!
interface Port-channel1.11
description VLAN11
vlan 11
nameif vlan11
security-level 90
ip address 10.0.11.1 255.255.255.0
!
interface Port-channel1.22
description VLAN22
vlan 22
nameif vlan22
security-level 90
ip address 10.0.22.1 255.255.255.0
!
interface Port-channel1.44
description VLAN44
vlan 44
nameif vlan44
security-level 90
ip address 10.0.44.1 255.255.255.0
!
ftp mode passive
dns server-group DefaultDNS
domain-name LAB.ACME.LOCAL
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
pager lines 24
mtu VLAN2 1500
mtu vlan11 1500
mtu vlan22 1500
mtu vlan44 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any VLAN2
icmp permit any vlan11
icmp permit any vlan22
icmp permit any vlan44
asdm image disk0:/asdm-713.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.44.0 255.255.255.0 vlan44
http 10.0.2.0 255.255.255.0 VLAN2
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:0d0eda56aed2c552947cd8b2fe4fc22d
: end
LAB-ASA-01#
Solved! Go to Solution.
11-12-2017 03:12 AM
I didn't see the following commands:
ssh x.x.x.x x.x.x.x interface
aaa new model
aaa authentication ssh console LOCAL
ssh version 2
Also make sure you ran the command:
crypto key generate rsa general-keys modulus 2048
-If I helped you somehow, please, rate it as useful.-
11-12-2017 03:12 AM
I didn't see the following commands:
ssh x.x.x.x x.x.x.x interface
aaa new model
aaa authentication ssh console LOCAL
ssh version 2
Also make sure you ran the command:
crypto key generate rsa general-keys modulus 2048
-If I helped you somehow, please, rate it as useful.-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide