syntax of nat command has been deprecated

[Salman.Baig]

nat (inside) 0 access-list inside_nat0_outbound
nat (DMZ) 0 access-list DMZ_nat0_outbound outside

this my old asa version now i upgrade on asa 5525 x please help me how can i change it when i copy past this command error show

Error

ASA5525-X(config)# nat (inside) 0 access-list inside_nat0_outbound
ERROR: This syntax of nat command has been deprecated.
Please refer to "help nat" command for more details.
ASA5525-X(config)# nat (DMZ) 0 access-list DMZ_nat0_outbound outside
ERROR: This syntax of nat command has been deprecated.
Please refer to "help nat" command for more details.

[Alan Ng'ethe · Accepted solution]

Could you start by supplying the following

show run | include access-list inside_nat0_outbound
show run | include access-list DMZ_nat0_outbound 

[Salman.Baig]

ASA5525-X# show run | include access-list inside_nat0_outbound
access-list inside_nat0_outbound extended permit ip host 10.128.1.2 host 10.128.5.1
access-list inside_nat0_outbound extended permit ip host 192.168.10.3 any
access-list inside_nat0_outbound extended permit ip host 10.0.2.78 any
access-list inside_nat0_outbound extended permit ip host 192.168.10.4 any
access-list inside_nat0_outbound extended permit ip host 10.0.2.79 any
access-list inside_nat0_outbound extended permit ip host 10.0.2.77 any
ASA5525-X# show run | include access-list DMZ_nat0_outbound
access-list DMZ_nat0_outbound extended permit ip host 10.128.5.1 host 10.128.1.2
ASA5525-X#

[Alan Ng'ethe · Accepted solution]

Thanks for these.

[Salman.Baig · Accepted solution]

Thanks alan for the help very very thanks to u

[chris00011111111111111]

what's the solution