10-16-2020 03:43 AM
Hi
Could You please answer can I upgrade FTDv (virtual) to version 6.5.0.4 if I have FMC on version 6.5.0.2?
Solved! Go to Solution.
10-16-2020 04:10 AM
Yes, I don't see why not. The name of the patch is misleading, there is no 6.5.0.3 (it was removed from CCO) - so that Hotfix D is applicable to FTD 6.5.0.2.
10-16-2020 04:17 AM
That's correct, the FMC must run same or newer version than the managed FTDs.
10-16-2020 03:51 AM
No, you need to upgrade FMC to 6.5.0.4 before you upgrade the FTD.
10-16-2020 04:00 AM
Thanks Rob
If I upgrade FTD to version 6.5.0.2 as it is on the FMC can I also install hotfix for version 6.5.0.2 but named Cisco_FTD_Hotfix_D-6.5.0.3-3.sh.REL.tar?
10-16-2020 04:10 AM
Yes, I don't see why not. The name of the patch is misleading, there is no 6.5.0.3 (it was removed from CCO) - so that Hotfix D is applicable to FTD 6.5.0.2.
10-16-2020 03:57 AM
best approach is FMC and FTD, check the compatability matrix before upgrade.
make sure you have offload backup config -(to be safe)
10-16-2020 04:12 AM
Hi Balaji
In matrix there is no info about 6.5.0.x. There is info that
Version 6.5.0.x devices | require| Version 6.5.0 FMC
but also
An FMC must run the same or newer version as its managed devices.
10-16-2020 04:17 AM
That's correct, the FMC must run same or newer version than the managed FTDs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide