cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1086
Views
5
Helpful
4
Comments
velo84
Level 1
Level 1

I'm currently redistributing OSPF to BGP and setting a local pref on the routes. Currently this works fine and having no issues. 

 ip prefix-list ospf-routes seq 10 permit 172.16.100.0/24
 
 route-map ospf-bgp permit 10
  match ip address prefix-list ospf-routes
  set local-preference 100

What I would like to do is have some routes with a local pref of 100 and some with a local pref of 200. I tried to create a new ACL and then a new permit statement in the existing route map but it gives an error saying you can only have one match ip statement in a routemap.

 

E.g. I wanted to do this (it doesn't allow this config though)

 ip prefix-list ospf-routes-cust-1 seq 10 permit 172.16.100.0/24
 ip prefix-list ospf-routes-cust-2 seq 10 permit 172.16.200.0/24
 
 route-map ospf-bgp permit 10
  match ip address prefix-list ospf-routes-cust-1
  set local-preference 100
 route-map ospf-bgp permit 20
  match ip address prefix-list ospf-routes-cust-2
  set local-preference 250

What would be the best way to achieve this?

Thanks

4 Comments
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: