Webcast video: Cisco SD-WAN Cloud onRamp for CoLocation
(Live Webcast Tuesday July 16, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 16th, July 2019 at 10hrs PDT
In this session, we explore how you can utilize the Cisco SD-WAN Cloud onRamp for CoLocation solution to conquer your cloud initiatives without having to sacrifice security, optimization, latency, and flexibility. Cisco SD-WAN Cloud onRamp for CoLocation enables IT to deploy network services in minutes, over an SD-WAN or traditional routing infrastructure with simplified orchestration and management. With centralized orchestration, it is now simple and easy to design, provision, and manage the trusted network services that are critical to your business. In the age of the cloud, it is all about latency reduction. Often times, this goal comes at the cost of reduced security, reduced optimization, and expensive dedicated circuits - all in the name of producing a high quality experience for end users.
Aaron Rohyans currently works on the SD-WAN Product Team within Enterprise Networking as a Technical Marketing Engineer. As a member and contributor of the team, he acts as a technical evangelist and enabler for partners and customers alike - bringing awareness to the need for Cisco SD-WAN, as well as the solution’s capabilities. He has been active in the Information Technology industry for several years with a Cisco-centric focus on Security, Routing/Switching, and Collaboration. Aaron graduated from the University of Indianapolis in 2005 with a degree in information systems and achieved his CCIE Security designation in 2008 (#21945).
Hello all. I am beginner on cisco configuration and networking. I managed a labs network and should include a Cisco C1111-8p inside.My management is limited to a Firewall and different switch below.It 's seems that I have configure correctly the WAN ...
The following documents are reviewed on the Ask The Experts Session titled: Use Case Overview and Planning: Cisco DNA Center Project Planning.
Here you can find editable versions of the
Solution Requirements Document UCOP_CiscoDNACenterProjectPlann...
I am trying to set a specific Ip address on a interface VLAN. When I check the configuration it shows me a # on the Ip address and on top it says "no ip address". I have assigned the VLAN to a port and had a device plugged in. When I check the config...
We have a pair of 3750Gs that we are seeing some orange lights on. There is a trunk between the two switches and off of each port a loop hangs, ie port 5 on the first switch is connected to a bunch of other switches that eventually come back to port...
I have an MX64 that has (very intermittent) connectivity issues with the outside world. It can be anywhere from 4 minutes to 15 minutes and it can happen 3 times in a day or once in a week. When I check the event logs I see 'Ethernet port carrier change'....