(Live Webcast Thursday February 28, 2019 at 9 am Pacific/ 12 pm Eastern / 6 pm Paris)
This event had place on Thursday 28th, February 2019 at 9hrs PDT
In this event, Hall of Fame Member Peter Paluch and Cisco Designated VIP David Peñaloza talk about Enhanced Interior Gateway Routing Protocol (EIGRP) fundamentals. The session seeks to clarify the status and fundamentals of the EIGRP protocol. In addition, the experts discuss the common steps used to troubleshoot operations and common issues with EIGRP.
Peter Palúch is a Customer Support Engineer in the EMEA High-Touch Support CX team with a focus on Data Center Switching technologies. In his free time he indulges in all technologies, particularly routing protocols, routed technologies, and MPLS-based services. Before Peter joined Cisco, he worked as a university professor and a Networking Academy instructor and instructor trainer. Peter is an author of the Cisco Press title “CCIE Routing & Switching v5.0 Official Certification Guide, Volume 1”. He holds a CCIE certification on R&S #23527.
David Samuel Peñaloza Seijas works as a Senior Network Consulting Engineer at Verizon Enterprise Solutions in the Czech Republic. Previously, he worked as a Network Support Specialist in the IBM Client Innovation Center in the Czech Republic. David is an expert interested in all topics related to networks. However, he focuses mainly on data centers, enterprise networks, and network design, including software-defined networking (SDN). David has a long relationship with Cisco. He has been a Cisco Instructor for the Cisco Academy and was recognized as a Cisco Champion and aCisco Designated VIPfor 2017, 2018 and 2019. David holds a CCNP R&S, CCDP, CCNA Security, CCNA CyberOps and a CCNA SP certification.
Hi All,I am asking for help to know about controlling my users from accessing the network. The scenario is given below:1. I want to configure a L-3-switch as D.H.C.P server with D.H.C.P snooping enabled2. I also want to enable A.R.P inspection3. Now I wan...
Hi All,I am asking for help to know about controlling my users from accessing the network. The scenario is given below:1. I want to configure a L3-switch as DHCP server with DHCP snooping enabled2. I also want to enable ARP inspection3. Now I want users w...
hello allcan please clarify for me little bit confused with :ip community-list 85 permit 10:20!route-map RMAP permit 10match community 85------------------------that community list tells labeled or TAG prefixes with community 10:20what does exactly mean ?...
Hey All, We have a Cisco 4507-R-E switch. One of the power supplies went out, so I took a power supply out of a Cisco chassis we are not longer using. The power supply that went out is a PWR-C45-2800ACV. The power supply I replaced it with is the sam...