Webcast video: Overview of Cisco's Branch Routing Portfolio
(Live Webcast Tuesday April 23, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 23th, April 2019 at 10hrs PDT
This session provides a broad overview of the branch routing portfolio and enables customers to make the right platform choice for their network. The Enterprise branch routing portfolio offers customers a wide variety of choices based on performance, form factor, LAN and WAN ports, Power over Ethernet (PoE) capabilities, programmability, and application hosting. It even accommodates certain ruggedized requirements that could satisfy most customer needs.
Meena Shar is a product Technical Marketing Engineer for Cisco 4000 Series Integrated Services Routers (ISR 4000) modular platforms and has worked at Cisco for 10 years. Prior to joining the Marketing Engineering team she worked as a Business Unit Escalation Engineer. Presently, she specializes in Quality of Service (QoS), Network-Based Application Recognition (NBAR), application hosting, and programmability on ISR 4000.
Eric Nelsonis a Technical Marketing Engineer for 4G/5G technologies, and for ISR 1000 and ISR 900. He has been with Cisco for almost two decades. In his first 15 years he provided support to different service providers on technologies such as ATM, Time-division Multiplexing (TDM) voice, and IP voice among others. Prior to joining Cisco, Eric worked at a telecommunications company supporting ATM backhaul. Currently, he supports cellular providers in the latest market transition to wireless last mile to Customer Premises Equipment (CPE).
Shameel Ummer is a product Technical Marketing Engineer for ISR 4000 modular platforms. He is responsible for Crypto VPN technology on all the ISR and ASR 1000 platforms as well as for Routing/MPLS/NAT/transport security technologies. Shameel joined Cisco two years ago. Before he joined the Technical Marketing Engineering team, he worked as a Network Consultant Engineer (NCE) for Cisco Security Solutions with Advanced Services. He holds four CCIE certifications; R&S, Service Provider, Security, and Data Center.
Hi, I'm try to setup the Anyconnect client on the ASA-5510. I want to make all traffic go through the firewall. But I can't access to the internet if I chose Tunnel All Networks. Can someone please tell me what did I set incorrectly on the ACL /...
Hi, recently we had purchase 2 units C9500 series and it will be a core switch. I would like to setup it by using stackwise virtual technology. Below is the SVL design:-* Two 10G interface for SVL link (it is redundancy supervisor engine, each link connec...
Hi All, Is there a method to add an additional ten gig link to an in-production 10 gig link to form a port channel. The catch here is that the 10 gig in-production link is a routed port having a L3 ip and the other end too is routed port an...
Dear all, I plan to use NX-OS N9k such as C93148GC-FXP and C93180YC-EX. (not ACI)I have a concern Processing order of traffic when using NAT Please look at follouwing URL.IOS NAT Order of Operation is Listed. [NAT Order of Operation]https:/...
Our server team advise us to check the L2 switch on the issue that the DHCP server running in windows has a 30s delay when leasing an IP address to a workstation. Connection is only through local area network. The DHCP server and the workstation are conne...